LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
- Body
   - Extern equipment and elements of body
      Removal and installation of the superior support of a compartment of reason
      Removal and installation of bumpers
      Removal and installation of a monk's hood, his lock and decorative front guard
      Removal, installation, desmontagem and meeting of an advanced door and his component
      Removal, installation, desmontagem and meeting of a back door and his component
      Removal, desmontagem, meeting and installation of a door of a few back and his component
      Removal and installation of cleaners and carenagem of a windshield
      Removal and installation of moldagens
      Removal and installation of a plunderer
      Removal and installation of the superior hatch
   + Hall equipment
+ Electric side equipment
+ Schematic diagrams of electric connections

8ca8824c

Removal and installation of a plunderer

Component of installation of a plunderer

1 - the Plunderer
2 - Side protection
3 - the Fighter capture


 ORDER OF REALIZATION

  1. Withdraw two captures of fighter and two pins.
  2. Stick on a body around a plunderer with the protective paper and a plunderer heats to the temperature of 40 ÷ the 60th hail.
  1. Through the chain that is rolled up in two grindstones they cut the layer of comparison of the fixation of a plunderer.

Do not damage a body.

  1. Desconecte an armbands plunderer.
  2. The 60th hail heats a body at the place of the fixation of a plunderer to the temperature of 40 ÷. also compensate for a body of the glue it remains.
  3. In the moment of the reuse of a plunderer they heat it to the temperature of 20 ÷ the 30th hail. also clear of the glue it remains.
  4. Establish new elements of the protection of side in a plunderer.
  5. Establish a plunderer, when they were taken and hold tight pins of fixation.