LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
- Body
   + Extern equipment and elements of body
   - Hall equipment
      Removal and installation of the panel and box of main article
      Removal of a fitted carpet of a floor and box of article of the central consolation
      Removal and installation of finish of a ceiling
      Removal, desmontagem, meeting and installation of front seats
      Removal, desmontagem, meeting and installation of rear seats
      Removal and installation of belts of seat and his emergence natyazhitel
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

Hall equipment

Removal and installation of the panel and box of main article

Component of panel

1 - the bar that Intensifies
2 - the Repayable spring of a pedal
3 - Meeting of a cushion of security of the advanced passenger
4 - the arm n ° 2
5 - the arm n ° 1
6 - the loudspeaker List n ° 1
7 - ECU ABS
8 - the Bedcover of the panel
9 - ECU of a body
10 - Meeting of the exhibition of multiple use
11 - the List of finish of the central consolation
12 - they separate the Side it segments the central consolation
13 - Meeting of the system sound
14 - the Air tube
15 - Nizhny Novgorod a segment of finish of the central section of the panel
16 - Fringing
17 - the List of finish of the lock of ignition
18 - the Lowest list of the central section of the panel
19 - Meeting of the lever of the selector of IN ways

20 - the List of finish of the lowest consolation
21 - the Lowest insertion
22 - the list of Understeering
23 - Nizhny Novgorod the bearer n ° 2
24 - Nizhny Novgorod the bearer n ° 1
25 - the devices Combination
26 - Finish of an advanced torture of a body
27 - Finish of a combination of devices
28 - the Lowest list n ° 2
29 - a CD scalper
30 - the segment of Side of the panel (right)
31 - the Combined switch
32 - the Lowest covering n ° 2
33 - the Lowest side list
34 - the segment of Side of the panel (left)
35 - Coverings of a column of direction
36 - the steering-wheel
37 - Finish of a threshold of an advanced door
38 - the Bedcover of a steering-wheel

Component of a way of system of ventilation

1 - Finish of the deflector of an obduv of a windshield
2 - Meeting of the deflector of an obduv of a windshield
3 - the Bedcover of the panel
4 - the door n ° 4
5 - the Side deflector n ° 2
6 - the Electrical system
7 - the Air tube n ° 5 of the side deflector
8 - the Air tube of the side deflector n ° 2
9 - the Air tube of a heater at the door n ° 4

10 - the Central air tube of a heater at the door
11 - Meeting of the lamp in an article box
12 - the Central arm
13 - the Air tube of a heater at the door n ° 1
14 - the Air tube of the side deflector n ° 1
15 - the Sensor of the sun
16 - the Sensor of automatic control of lighting
17 - the arm n ° 1
18 - the Side deflector n ° 1
19 - the door n ° 1


In сопр. the illustrations the type of the fixation of the component ones enumerated also if they specify: the letters with one in F indicated pins and screws, in the letters G and H – nuts, but the component ones that are not indicated by letters fix armbands.


 ORDER OF REALIZATION

  1. Constantly withdraw component of panel 30, 34, 37, 26, 33, 6 and 32, having launched them of armbands.
  1. Separate the capture of cushion of security, trying not to damage an electrical system.
  1. 2 withdraws the lowest list n °, when 2 pins and 2 screws resulted.
  1. In the corresponding complete set 4 nuts turn, they separate the capture and remove a scalper of CD.
  1. Result 2 pins and 2 nuts and withdraw the meeting of a cushion of security.

After the removal they store the meeting of a face of cushion of security. Do not investigate the meeting of a cushion of security. During the installation they hold tight the fixation with the necessary efforts, substitute the meeting of a cushion of security with visible damages, do not allow the short circuit of an electrical system of a cushion of security.

  1. Withdraw a steering-wheel with a mistake, and also the coverings of the column of direction (to see the Removal of Section, installation, desmontagem and meeting of a column of direction).
  2. Constantly withdraw component of panel 17, 20, 22 and 21, having launched them of armbands and when 2 pins turned in two last cases.
  3. Withdraw a column of direction (to see the Removal of Section, installation, desmontagem and meeting of a column of direction).
  4. Constantly withdraw component of panel 16, 12 and 18, having launched them of armbands and when 6 screws turned in the last case.
  1. Result 4 pins and withdraw the list of the finish of the central consolation.
  1. Separate captures, result 4 pins and withdraw meetings of the exhibition of multiple use and the system sound.
  1. Result 2 screws and withdraw the finish of a combination of devices.
  1. Separate the capture, result 3 screws and withdraw a combination of devices.
  2. Result two pins and remove the lowest bearers (23 and 24).
  3. Separate the capture, desconecte the sketch, give 4 nuts and withdraw the meeting of the lever of in the SELECTOR.
  4. Withdraw air tubes.
  1. Separate captures, result 2 pins and 2 nuts and withdraw a bedcover of the panel.
  1. Give the fixation and withdraw arms n ° 1 and n ° 2 (4 and 5).
  2. Result 2 nuts and withdraw modules of the management of a body and ABS.
  3. Withdraw a repayable spring, a pin, 2 nuts result and withdraw the block of the alternation and locks of security below the panel.
  1. Result 4 pins and 4 nuts and withdraw a bar that intensifies.
  1. Constantly 11, 12, 18, 5, 1, 2, 7, 14, 8, 13, 9, 19, 4 withdraws number of component n °, and 10.
  1. Result 5 screws, pull out armbands and withdraw an electrical system.
  1. Result 2 screws and 1 withdraws an arm n °.
  2. Withdraw the sensor of the sun and the sensor of the automatic control of the lighting.
  3. The installation is done upside-down. Hold tight the fixation with the necessary efforts, substitute the deformed armbands.