LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car

Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
- Placing and regular maintenance of the car
   General information
   General information on placing and agreements
   Time-table of regular maintenance
   Check of levels of liquids, control of holes
   Check of a condition of tires and pressure of his evaluation, rotation of wheels
   Substitution of filter of oil of reason and filter of oil
   General checks of the system of brakes
   Check and substitution of the filter of hall of a heater and to / in
   Check of a state and substitution of hoses of a compartment of reason, location of holes
   Check of a state and substitution of belts of the walk of auxiliary unities
   Substitution of the element of purifier of air of filtration
   Check of a condition of system of production of the carried out gases
   Check and substitution of captures of spark
   Substitution of fluid of brake, extraction through bomb of the system of brakes
   Check of a condition of component ones of a support of the triangular form of interruption and direction
   Check of a condition of protective coverings of ends of power and hinges of the driving axle
   The check of the operabilidade of there illuminate fixations, horn and supporter of a heater
   Check of the system EVAP
   Check of a state, agreement and substitution of brushes from clothes to rub of fabric
   His check of a condition of the battery and care
   Substitution of the cooling of liquid (CL)
   Check and adjust of slits valvate
   Check and adjust of the course of pedals of the work and parking brake
   Check of boots of the brake of parking
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections

Placing and regular maintenance of the car

Specifications

Types and volumes of the hard-working and liquid lubricants

Type of fuel	Gasoline, it is not worse than OH 91 (OH 95 recommends himself)
Volume of the tank of fuel, l	65
Type of oil of reason according to the API//specifications of ACEA	SJ or SH (CE-II)//A2-98
Viscosity of oil of reason according to the specification SAE
For any time	5W-30
In the moment of operation in temperatures I do not lower - 18 a hail	10W-30
Volume of oil of reason, l
Full	5.2
After depleção
With an oil filter	4.7
Without oil filter	4.5
For increase in level of more low to the superior etiquette in the probe, l	1.5
Type of oil of gear box for in (ATF)	T-IV or similar
Expand (full//after depleção) ATF, l
U140E	8.25/3.5
U140F	9.15/4.1
Oil of gear box of the rear case of transfer and differential
Type according to the specification API	GL-5
Viscosity according to the specification SAE in the moment of operation in a temperature:
It is higher than - I granulate 18.	90
It is lower than - I granulate 18.	80W or 80W-90
Expand, l	0.9 ± 0.05
Amount of lubricant of UNIONS HP of ends of power, гр.
Dispatch ends of power (models 2WD)
Extern UNION of HP	150÷160
Internal UNION of HP
Of the hinge	43÷53
Of a covering	90÷100
Dispatch ends of power (models 4WD)
Extern UNION of HP	115÷135
Internal UNION of HP	95÷115
Subsequent power ends (models 4WD)
Extern UNION of HP	107÷117
Internal UNION of HP	180÷190
Type of cooling the liquid	On basis of glicol of ethylene
Expand of cooling the liquid, l	9.0
Type of fluid of brake	SAE J1703 or the POINT 3 n ° 116 FMVSS
Type of liquid of GUR	ATF Dexron II or III
Volume of liquid GUR, l	1.1
Type//quantity (гр). Refrigerant liquid of K/V	R134a//650 ± 50
Type of the oil of compression K/V	Oil of Nippondenso 8 or similar

Motor

The type of the spark covers//slit of interelectrode, mm	Nippondenso SK20R11//1.0÷1.1, Champion RC8PYPB4//1.0 or NGK IFR6A11//1,0 ÷ 1.1
Slits of Valvate (in the motor down cooled), mm
Entry valves	0.15÷0.25
Final valves	0.25÷0.35
Thickness of lavadores of slits agreement valvate, mm	from 2,50 to 3,30 with the step 0.05
Tension of a belt of the walk of the compressor K/V and creator (in the siege between them), N
New belt	734 ± 115
Old belt	391 ± 98
Tension of a belt of the walk of the bomb GUR, H
New belt	667÷823
Old belt	423÷600

Brakes system

Release to go round of a pedal of a brake, mm	1 ÷ 6
Distance of the pedal of brake launched to a floor, mm	193÷203
The distance of the pedal of brake that corsets itself out with the effort of 490 N to a floor, mm	not less than 122
The number of clicks in the moment of lifting of parking brakes in effort of 294 N	5÷7
Thickness of boots of the brake of parking, mm
Standard	2
The admissible minimum	1

Efforts of corseting itself of screwed connections, Nanômetro

Nuts of fixation of wheels	103
Drain the cork of oil of reason	45
Pins of fixation of a belt of the walk of the creator and compressive K/V
I set pins with hinges	56
The fixation pin	18
Fixation of an arm of a level of agreement of a belt of the walk of the creator and compressive K/V	to see the Head of the system of Cooling of the motor, heating, ventilation and air conditioning
Fixation of belt of Pump GUR drive	43.1
Drain traffic jams of traffic of the system of cooling
Cork in a covering of side of the cylinder block of models 2WD	7
Other traffic traffic jams	13
Unions of extraction through supports bomb and activator	8.3
Countersow of a stick of press of a pedal of a brake	26
Countersows of a coupler of screw of agreement of the brake of parking
TO	5
B	12.5