| Hitting of the driving axle, mm |
not more than 0.8 |
| Hitting of intermediary section of the driving axle, mm |
not more than 0.8 |
| It wears out of flanges of intermediary section of the driving axle |
not more than 0.1 |
| Release to go round of a power end in the axial direction, mm |
2 ÷ 3 |
| Type and rise (g) of the lubricant to fill of coverings of UNIONS HP of ends of power |
|
|
I yellow, 115 ÷ 135 |
|
|
Ash, 95 ÷ 115 |
| Type and rise (g) of the lubricant to fill of coverings of hinges of rear ends of power |
|
|
Ash, 107 ÷ 117 |
|
|
I yellow, 180 ÷ 190 |
| Length standard of ends of power, mm |
|
|
563.2 ± 2.0 |
|
|
914.8 ± 2.0 |
| Length standard of rear ends of power, mm |
607.7 ÷ 5.0 |
| There splits in the lock of a collar of a protective covering of the UNION HP day-pupil of an end of power, mm |
1.2 ÷ 4.0 |
| Depth of a proof of press of a rear advanced epiploon of differential, mm |
2.0 |
| Depth of a proof of press of differential advanced side bottom epiploons, mm |
0 |
| Hitting of a flange that joins of differential bottom, mm |
not more than 0.1 |
| Axial thrashing of the wheel of driven gear of differential bottom, mm |
not more than 0.07 |
| Play of rear axial side of the wheel of driven gear of differential, mm |
0,13 ÷ 0.18 |
| Play of axial side of a wheel of gear of rear side of differential, mm |
0,05 ÷ 0.20 |
| Claim of the rear load of the wheel of main gear of differential, Nanômetro |
|
|
1.1 ÷ 1.7 |
|
|
0.6 ÷ 0.9 |
| Rear preload full of differential, Nanômetro |
0.3 ÷ 0.5 + load of claim ведущёй gear wheels |
| Thickness of lavadores persistent of wheels of gear of rear side of differential, mm ± 0,02 mm |
0,95 ÷ 1.40 with the step 0.05 |
| Thickness of lavadores persistent of the wheel of driven gear of differential, mm ± 0,01 mm |
0,22 ÷ 3.21 with the step 0.03 |
| Thickness of lavadores of agreement of a slit between the driven gear wheels and they drive of differential bottom, mm ± 0,01 mm |
2,27 ÷ 2.69 with the step 0.03 |
| Wheel nuts |
103 |
| Nuts of Stupichny |
|
|
294 |
|
|
216 |
| Pin of fixation of sensors of speed of ABS |
|
|
8 |
|
|
20 |
| The pins of the fixation of hinges cardan to support the differential one and in |
74 |
| To join pins of back and central sections of the driving axle |
27 |
| Pins of fixation of support of the driving axle |
37 |
| Fixation nuts of flanges of the driving axle |
1st approximation
|
181 |
2nd approximation
|
69 |
| Drain and the thickened traffic jams of traffic of the differential bottom |
49 |
| Nut of fixation of a flange that joins of differential bottom |
108 ÷ 235 |
| Fixation of the central sections and rear sections of a tube of leak |
43 |
| Pins of fixation of a rear damper of differential |
95 |
| Pins of fixation of an angry ray of a rear support of the triangular form of interruption to an esticador |
137 |
| Pins of fixation of differential bottom to an angry ray of a rear support of the triangular form of interruption |
103 |
| Fixation of a rear esticador to a body |
|
|
83 |
|
|
181 |
| Pins of fixation of the case of the internal hinge of an end of rear power to differential |
56 ÷ 69 |
| Pins of fixation of plates of lock to a differential box |
97 |
| Pins of fixation of coverings of loads to a covering of fixation of differential |
79 |
| Fixation pins of maslootrazhatel in a covering of a covering of fixation of differential bottom |
7.4 |
| Cork of a rear sapun of differential |
21 |
| Pins of fixation of a covering of fixation of differential bottom |
47 |
