LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
- System of provision of power and production of the carried out gases
   - System of provision of power
      General information and measures of security
      To leave pressure in fuel system
      Beginning of functioning of a system of control of injection of fuel
      Checks of system of injection
      Removal and installation of the bomb of fuel, sensor of a reserve of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive roads and injectors
      Removal and installation of the tank of fuel and lines of fuel
      Removal and installation of the purifier of air
      Removal, installation and agreement of the case of a regulator and sensor TPS
      Removal and installation of component ones of the system ACIS
   + Systems of launch and reduction in toxicity of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

To leave pressure in fuel system

Before coming to work, know the measures for precaution when security measures were given in the general Information of Section e.


After the implementation of the proceeding described down in oil pipelines there will be one gasoline. Before desconectar any fuel hose, it takes steps for precaution necessary.


 ORDER OF REALIZATION

  1. In the fuel of motor of work in a way of a provision of being able a system is below the pressure that it keeps on remaining during it up to enough long time after putting out of the ignition. Before a lack of interest of some of component ones of the system they deposit the pressure in a step.
  2. The most simple way of depositing of the pressure in a system of provision of power is a launch of the motor in the lock of security been overcome with the bomb of fuel or his capture off, - they hope for a spontaneous stop of the motor, then, for a guarantee of the perfection of the unloading of the pressure, several times turn it an author. If it is not possible to begin the motor, to turn it an author inside several seconds. Having finished the proceeding, put the ignition out and return at the place the lock of retired security or join the capture.
  3. Remember that after the pressure / removal that falls of the fuel the system of provision of power in the launch of the motor is left by lightly more time, of which normally - there is necessary there turns inside several seconds an end of inclination an author until the pressure in the system is restored, and the fuel will fill all the tubes of fuel.