LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
- System of provision of power and production of the carried out gases
   - System of provision of power
      General information and measures of security
      To leave pressure in fuel system
      Beginning of functioning of a system of control of injection of fuel
      Checks of system of injection
      Removal and installation of the bomb of fuel, sensor of a reserve of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive roads and injectors
      Removal and installation of the tank of fuel and lines of fuel
      Removal and installation of the purifier of air
      Removal, installation and agreement of the case of a regulator and sensor TPS
      Removal and installation of component ones of the system ACIS
   + Systems of launch and reduction in toxicity of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

Removal, installation and agreement of the case of a regulator and sensor TPS

Removal and installation

Component of installation of the case of a regulator

1 - Placing
2 - the Case of regulator
3 - Perepuskna a hose of system of cooling
4 - the Thread of the walk of a valve of butterfly

5 - a Hose of purifier of air
6 - the Vacuum hose
7 - the Air hose
8 - the receiver of Aplainação

Component of meeting of the case of a regulator

1 - they strangle the Section n ° 3 of if
2 - the Protective plate
3 - the Fighter ring
4 - the sensor TPS

5 - they strangle the Section n ° 1 of if
6 - Placing
7 - they strangle the Section n ° 2 of if
8 - the valve IAC


 ORDER OF REALIZATION

  1. Empty the system of cooling of motor (to see the Substitution of Section of Cooling Liquid (CL)).
  2. Desconecte a thread of the walk of a valve of butterfly and withdraw a hose of purifier of air (there sees the Removal of Section e an installation of the purifier of air).
  3. Separate captures of an electrical system of the sensor TPS and a lapan of IAC.
  4. Desconecte hoses perepuskny of the system of cooling of the motor, a hose of air mixture, two hoses of the offer of evaporation of fuel and a hose of vacuum of the case of regulator.
  5. Give 3 nuts and withdraw the case of regulator together with the placing.
  6. During the installation they use the new placing between the case of a regulator and the air distributor. Hold tight the fixation with the necessary efforts.
  7. During the installation of the sensor TPS in the beginning they apply it to the case of regulator, when 30÷60 lit a corner a hail. in the direction of the movement of the pointers of the clock, and soon fix the sensor, having turned it against an hour hand.

Agreement

 ORDER OF REALIZATION

  1. Giving a countersow and the screw of agreement in the party of opening, there exposes a slit between a head of screw and the lever of a regulator in n ° 1 supporter (to see illustrations).
  2. Gradually holding tight the screw, bring it in the situation in which it begins to concern the lever.

Do not draw the screw. Then the screw turns in a room of a turn. Also a countersow registers it in this situation.

  1. Repeat the described agreement of the screw in the party of opening.

The screw of agreement of the provision of contacts with the lever must corset itself in 1/2÷3/4 of a turn.

  1. In the conclusion check the case of regulator (to see the Section of the Check of the system of the injection).