Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
- System of provision of power and production of the carried out gases
- System of provision of power
General information and measures of security
To leave pressure in fuel system
Beginning of functioning of a system of control of injection of fuel
Checks of system of injection
Removal and installation of the bomb of fuel, sensor of a reserve of fuel and regulator of pressure of fuel
Removal and installation of fuel distributive roads and injectors
Removal and installation of the tank of fuel and lines of fuel
Removal and installation of the purifier of air
Removal, installation and agreement of the case of a regulator and sensor TPS
Removal and installation of component ones of the system ACIS
+ Systems of launch and reduction in toxicity of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
|
Removal and installation of fuel distributive roads and injectors
|
|
Do not leave injectors and do not subject them the loadings and deformations from that time at the same time it is possible to damage injectors. |
Fuel meeting distributive roads and injectors
|
|
- Withdraw a sleeve of purifier of air.
- Withdraw the meeting of the air distributor (to see the Substitution of Section, desmontagem and meeting of the block of K/V).
- Separate captures of an electrical system of injectors.
- Desconecte a tube of the mixture of air of a support of triangular form n ° 1 of a tube of fuel then desconectam hoses of the mixture of air of the oil pipeline of entry.
- Desconecte a tube toplivopodayushchy of the fuel filter.
- Result 5 pins and distributive roads withdraw the fuel together with injectors and a tube of fuel.
- Take 4 sharing of the fuel distributive road.
- Spread injectors of the fuel out distributive roads.
- Withdraw two rings of fighter and two placing of each injector.
- Check injectors (to see the Section of the Check of the system of the injection).
- The installation is done as it must be, the return to an order of is demolished of component ones. Use new rings of fighter and placing, hold tight the fixation with the necessary efforts.
- After the installation they are secured of the lack of the hole of the fuel.
|
|
|
|
