LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
- Support of the triangular form of interruption and direction
   General information
   + Dispatch the support of the triangular form of interruption
   - Support of the triangular form of subsequent interruption
      Removal, desmontagem, meeting and installation of a nave of a rear wheel
      Removal, desmontagem, meeting and installation of a torture of a support of the triangular form of interruption
      Removal and installation of the stabilizer of a support of the triangular form of interruption
      Removal and installation of levers of a rear support of the triangular form of interruption
   + Direction
   + Geometry of support of the triangular form of interruption
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

Support of the triangular form of subsequent interruption

Below of the rear support of the triangular form of interruption of the traction in four model wheels one considers.

Removal, desmontagem, meeting and installation of a nave of a rear wheel

Component of meeting installation stupichny of a rear wheel

1 - the Angry lever n ° 1 of a support of the triangular form of interruption
2 - Sensor of speed of ABS
3 - Bearers of boots of brake
4 - the Thread of the brake of parking
5 - the Power end
6 - the Angry lever n ° 2 of a support of the triangular form of interruption

7 - the Brake support
8 - the Longitudinal lever of a support of the triangular form of interruption
9 - meeting stupichny subsequent
10 - the Brake disc
11 - Meeting of the brake of parking
12 - the Quiff
13 - the Fixation hat

Component of meeting stupichny of a rear wheel

1 - the Internal epiploon
2 - the Bearer of a nave
3 - the Lock ring

4 - the Load
5 - the Extern epiploon
6 - the Protection covering
7 - the Nave

Removal and installation

 ORDER OF REALIZATION

  1. Withdraw a rear wheel.
  2. Measure a play of axial side of the load of pressure of a rear wheel and an axial thrashing of a nave, which works for the analogy with the Removal of Section, desmontagem, meeting and installation of a nave and a rotary fist.
  3. Take the quiff of a countersow of an end of power and, having held tight it had been a pedal of brake, a countersow results.
  4. Withdraw a support of brake and a disc of brake (the Head sees the System of brakes).

Confiantemente ties a support so that it was not bent and the hose of flexible brake was not loaded.

  1. There results the fixation of the sensor of the speed of ABS and the bearer of his electrical system.
  2. Take to pieces the brake of parking (the Head sees the System of brakes).
  3. Result two pins and desconecte a thread of the brake of parking of a covering of the meeting stupichny.
  4. One weakens, two nuts of the fixation are resistant supports of the triangular form of interruption to the meeting stupichny.

Still do not take pins.

  1. There results a pin of the fixation of the longitudinal lever of a support of the triangular form of interruption to the meeting stupichny and desconecte of him the lever.
  2. There results a pin of agreement and a nut of the fixation of the angry lever n ° 1 of a support of the triangular form of interruption to the meeting stupichny and desconecte of him the lever. In the same way desconecte the angry lever n ° 2 of the meeting stupichny.
  3. Completely result two pins of the fixation of a torture of a support of the triangular form of interruption to the meeting stupichny and link.

Do not damage the covering of protection and a rotor of the sensor of the speed of ABS.

  1. The installation is done upside-down. After installation check a sign of the sensor ABS.

To be demolished and meeting

 ORDER OF REALIZATION

  1. Withdraw through the special adaptation a nave of the bearer.
  2. Vypressuyte internal bearer of the load of pressure of stupichny.
  3. Result 4 nuts and withdraw the covering of protection of the meeting stupichny.
  4. Take epiploons internally and extern, and also a lock ring.
  5. Vypressuyte the load of the bearer of a nave.
  1. If necessary it withdraws pins of nave through the special adaptation. The pins installation is done corseting itself of a nut.
  1. The meeting is done upside-down. Delay connections with the necessary efforts. Use new epiploons and a lock ring. If during the installation of an internal bearer of the load of stupichny and his scamps the weak point is formed, one secures what are established in the correct party.