|
|
LEXUS RX 3001998 - 2003 of launchRepair and operation of the car |
|
|
Lexus RX 300 + Lexus RX-300 cars + Administrations and methods of operation + Placing and regular maintenance of the car + Motor + Cooling systems of the motor, heating, ventilation and air conditioning + A system of provision of power and production of the carried out gases + Systems of electric equipment of the motor + Automatic exchange and differential interaxal + Transmission line + Brakes system - Support of the triangular form of interruption and direction General information + Dispatch the support of the triangular form of interruption + Support of the triangular form of subsequent interruption + Direction - Geometry of support of the triangular form of interruption The angles of installation of wheels of the car - the general information Check and adjust of angles of installation of advanced wheels Check and agreements of angles of installation of rear wheels + Body + Electric side equipment + Schematic diagrams of electric connections 
|
Geometry of support of the triangular form of interruption The angles of installation of wheels of the car - the general information The disorder is called the angle of canvas of airplane of wheel about vertical. If the wheels lean for the superior edges on the outside, the disorder is called positively and vice-versa. The size of the disorder is measured in degrees. The fairness of the agreement of the disorder determines the size and the provision of a place of the protectors' contact with a road surface and allows to compensate for the modifications in the geometry of support of the triangular form of interruption that happens during the commission of turns and in the moment of the movement of the car in an unequal road surface. One calls the convergence (convergence) the size of data to other of advanced edges of wheels of the car. Such a violation of the parallelism of the installation of wheels allows to minimize the use of a protector due to the prevention of a slip in the commission of turns. In the null convergence the distance between advanced wheels edges is the same as the distance between his rear edges. The size of the convergence of wheels is specified in Specifications of the Chief Podvesk and direction. The violation of the agreement of the convergence leads to the acceleration of the protectors' use of tires due to them sliding in a road surface. Vybegom calls a corner of a longitudinal inclination of an axle of the turn of a wheel, i.e. corner of a detour of this axle of vertical in the edge airplane. If the axle of the turn leans behind, the выбег is called a positive, on the contrary. The size of angles of limit of the rotation of advanced wheels of the car has to be reduced in the increase in the size of the last one. The general control of the geometry of a support of the triangular form of interruption happens in the special bookcase in the conditions of a specialized workshop. |
|