Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
- Cooling systems of the motor, heating, ventilation and air conditioning
- System of cooling of motor
Information general and measured by precaution
Removal, check and installation of the water bomb
Removal, check and installation of the thermostat
Check of component ones of the system of cooling
Removal and installation of an electric heater and supporters
+ Systems of heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
|
Removal, check and installation of the water bomb
Pins of fixation of the water bomb
The water bomb is located below a covering n ° by 3 of a belt of GRM drive and it fixes to the cylinder block four pins and two nuts.
|
|
- Empty the system of cooling (to see the Substitution of Section of Cooling Liquid (CL)).
- Withdraw a carenagem of a windshield and the superior support of a compartment of reason (to see the Chief Kuzov).
- There takes away a belt of GRM drive, his cog-wheels and a roll n ° 2 (there see the Removal of Section, check and installation of a belt of GRM drive of his natyazhitel, pulley and cog-wheel of an end of inclination, cog-wheels of axles and intermediary rolls).
- Drive discovers the belt of GRM n ° 3 (to see the Removal of Section, desmontagem, checks, meeting and installation of a head of cylinders and his component).
- The fixation of the water bomb results and withdraw it together with the placing.
- Examine a control that opens in a bomb accommodation in the holes existence and if necessary the water bomb substitutes.
- To make spinning a roll of the water pumps a hand, checks the smoothness and the tranquillity of the course of his load. If necessary the water bomb substitutes.
- Having taken an opportunity, check component of GRM drive (there see the Removal of Section, check and installation of a belt of GRM drive of his natyazhitel, pulley and cog-wheel of an end of inclination, cog-wheels of axles and intermediary rolls).
- The installation is done as it must be, the return to an order of is demolished of component ones. Use the new placing of the bomb, hold tight the fixation with the necessary efforts.
|
|
|
|
During the installation of the placing they do not do the oil he. |
|
|
