LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
- Transmission line
   General information
   Removal and installation of the driving axle
   Removal, desmontagem, meeting and installation of advanced ends of power
   Removal, desmontagem, meeting and installation of rear ends of power
   Substitution of a rear advanced epiploon of differential
   Side substitution epiploons of differential bottom
   Removal and installation of the rear case of differential, desmontagem of differential
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

Removal and installation of the rear case of differential, desmontagem of differential

Component of differential installation bottom

1 - the Damper
2 - the subsequent esticador
3 - the Power end

4 - the Bearer
5 - subsequent differential
6 - the subsequent angry ray
7 - the driving Axle

Component of differential meeting bottom

1 - differential Planetarium
2 - Differential of escorregamento limited
3 - the Persistent lavador
4 - the Lock pin
5 - the satellites Axle
6 - the wheel of gear of Side
7 - the Satellite
8 - the Lavador
9 - the Side load
10 - the wheel of Driven gear
11 - a differential Box
12 - the Lock plate
13 - the Cork of a sapun
14 - Maslootrazhatel
15 - a load Covering

16 - the Lock ring
17 - the differential Case
18 - Placing
19 - the Covering of the bearer of differential
20 - Epiploon
21 - the wheel of Main gear
22 - the subsequent load
23 - Side drive
24 - the Boot
25 - the Cork of a gooey opening
26 - the Covering of a covering of the bearer of differential
27 - the flange that Joins
28 - Maslootrazhatel
29 - the Advanced load
30 - Prostavka of the load
31 - the Drain cork


 ORDER OF REALIZATION

  1. Withdraw the driving axle and ends of power, which previously confiantemente having support them (there sees the Removal of Sections e an installation of the driving axle and Removal, desmontagem, meeting and installation of rear ends of power).
  2. Lower not quite differential.
  3. Withdraw the central sections and the rear sections of the tube of leak.
  1. The differential one supports a monkey, give 3 pins of fixation and withdraw a damper.
  1. Weaken 2 pins and support a rear esticador.
  1. Give 4 nuts and 2 pins, remove 2 bearers of a rear esticador.
  2. Lower the differential one together with a rear esticador.
  3. Completely result 5 launched pins, 2 nuts and withdraw the differential one.
  4. Result two pins, nuts and withdraw a rear ray of cross of the differential one.
  5. The desmontagem of recommends differential to herself being accused to an expert who has the corresponding skills and experience. The data of check and meeting of the differential bottom supply with themselves in Specifications of the Head the Line of transmission.
  6. The differential box with the limited escorregamento is not subject to the desmontagem.
  7. The installation is done upside-down. Delay connections with the necessary efforts.