LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
- Transmission line
   General information
   Removal and installation of the driving axle
   Removal, desmontagem, meeting and installation of advanced ends of power
   Removal, desmontagem, meeting and installation of rear ends of power
   Substitution of a rear advanced epiploon of differential
   Side substitution epiploons of differential bottom
   Removal and installation of the rear case of differential, desmontagem of differential
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

Removal and installation of the driving axle

Component of driving axle

1 - Advanced section of the driving axle
2 - the Boot
3 - the Load of a rear support
4 - Plastina
5 - the Agreement lavador
6 - the Load of an advanced support

7 - the Lavador
8 - Intermediary section of the driving axle
9 - the subsequent flange
10 - the Advanced flange
11 - subsequent section of the driving axle

Removal

 ORDER OF REALIZATION

  1. Apply etiquettes of agreement in an advanced flange and in the hinge.
  1. Give 4 nuts and withdraw pins and lavadores.
  2. Withdraw the meeting of the advanced section of the driving axle, trying not to damage an epiploon.
  3. Zakuporte an opening in in preventing the hole of oil.
  4. Hold tight out a pedal of a brake and maintain it in this situation.
  5. Result 6 pins join half of way.

Fill rags that a covering did not concern in the hinge.

  1. Apply etiquettes of agreement in a rear flange and in the hinge.
  2. Give 4 nuts and withdraw pins and lavadores.
  3. Result pins of the fixation of the support and withdraw the meeting of the central sections and the rear sections of the driving axle.
  4. Wall light etiquettes in the connection of the central sections and the rear sections of the driving axle.

It does not put an etiquette with a chisel.

  1. Completely result 6 pins are joined, withdraw two lavadores and divide the central sections and rear sections of the driving axle.

Installation

 ORDER OF REALIZATION

  1. Join the central sections and the rear sections of the driving axle, having leveled the etiquettes of agreement applied in them in the separation.
  2. Establish two lavadores and hold tight for the hand 6 pins they are joined.
  3. Temporarily install the central basic load.
  4. Direct the etiquettes devoted to the removal in the rear hinge and in the differential bottom.
  5. Hold tight 4 pins with the effort of 74 nanômetros.
  6. Take away a hat of in and establish a bearer.
  7. Direct the etiquettes devoted to the removal in the advanced hinge and in the intermediary section of the driving axle.
  8. Hold tight 4 pins with the effort of 74 nanômetros.
  9. Hold tight out a pedal of a brake and having asked the spectator to maintain it, to hold tight pins they are joined with the effort of 27 nanômetros.
  1. It is secured what all the hinges of the driving axle tackle.
  1. In the unloaded car they adjust the distance between the rear party of a covering and end.
  1. In the unloaded car they adjust distances between faces of end of basic loads and faces of end of the support.
  1. Hold tight pins of the fixation of the support for the effort of 37 nanômetros.
  2. One secures that the axes of the support are perpendicular axes of driving axle.