LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
- Transmission line
   General information
   Removal and installation of the driving axle
   Removal, desmontagem, meeting and installation of advanced ends of power
   Removal, desmontagem, meeting and installation of rear ends of power
   Substitution of a rear advanced epiploon of differential
   Side substitution epiploons of differential bottom
   Removal and installation of the rear case of differential, desmontagem of differential
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

Substitution of a rear advanced epiploon of differential

Component of installation of a rear advanced epiploon of differential

1 - Placing
2 - the Cork of a gooey opening
3 - the driving Axle
4 - the flange that Joins

5 - Epiploon
6 - the ring of Maslootrazhatelny
7 - the Advanced load
8 - Prostavka of the load
9 - the Drain cork


 ORDER OF REALIZATION

  1. Lower the oil of the differential bottom.
  2. Withdraw the driving axle (to see the Section of the Door).
  3. Chisel and I hammer to a nut raschekanta.
  4. Maintaining a flange that joins through the special adaptation, a nut results.
  1. Withdraw a flange that joins through the special adaptation.
  1. Through the special adaptation they withdraw an epiploon, and soon – a ring of maslootrazhatelny.
  1. Withdraw the advanced load and through an artist of streaptise specially, withdraw a sharing load.
  2. Establish a new sharing of the load and the connection with an end.
  3. Establish a maslootrazhatelny they touch and hold tight a new epiploon in the 2,0 mm depth.
  4. Apply the universal lubricant in edges epiploon.
  5. Through the special adaptation they establish a flange that joins in an end.
  6. Oil a woodcarving of a nut of fixation of a flange of differential and property of a flange of a provorachivaniye, hold tight a nut with the effort of 108 nanômetros.
  7. Adjust a preliminary tension of the wheel of main gear.
  8. Rivet a nut.
  9. Install the driving axle and fill differential of the oil according to the demands of Specifications of the Head to transmission Line.