LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
- Brakes system
   General information and measures of security
   Removal, installation and check of pedals of the system of brakes
   Check of the system of brakes was seeing the capture of the module of management
   Removal and installation of the tank and cylinder of main brake (MBC)
   Removal, check and installation of the amplifier of brakes
   Substitution of shoes of brake
   Removal, desmontagem, checks, meeting and installation of supports of mechanisms of brake
   Being demolished, check and the meeting of the brake of parking
   Check of valve of distribution of effort of brake
   Removal and installation of the activator of brakes
   Removal and installation of sensors of wheel
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

Removal, desmontagem, checks, meeting and installation of supports of mechanisms of brake

The component ones of the meeting of the mechanism of brake of an advanced wheel present to themselves in the illustration the Meeting of the Mechanism of Advanced Brake.

Meeting of the mechanism of rear brake

1 - Placing
2 - the Cork
3 - the Union of bomb
4 - the Support
5 - the Boot
6 - the Piston
7 - a Ring of covering of piston
8 - a piston Covering

9 - Consolidation of the piston
10 - the capture Direction
11 - the hair clip of Main hair
12 - a Support of the triangular form of support
13 - the shoe of Extern brake
14 - of antivizgovy I Intern the mistake
15 - Antivizgovaya a mistake
16 - Bearers of shoes of brake
17 - the shoe of Internal brake

Removal and desmontagem

 ORDER OF REALIZATION

  1. Withdraw the corresponding wheel and temporarily fix a disc of brake for wheel nuts.
  2. A pin of a support results, withdraw the placing and desconecte a hose of flexible brake of a support.

Prepare the capacity to join the fluid of brake.

  1. Result pins of agreement of a support (in the mechanism of rear brake – a pin) and withdraw a support of a support of triangular form.
  2. Withdraw shoes of brake with bedcovers of antivizgovy and blocks bearers.
  3. In the back they withdraw mechanism of brake, the hair clip of main hair that directs the capture with two epiploons and a covering of the hair clip of main hair.
  4. Through the screwdriver they withdraw a ring of a covering of the piston of brake and a covering.
  5. Put between the piston and a few rags of support not to damage the piston in the moment of his extraction and, having given the air pressed to the union of the mechanism of brake, to put the piston for out of the cylinder.

It does not maintain fingers between the piston and a support during the removal of the piston through the compressed air.

  1. The screwdriver withdraws the consolidation of the piston:
    • In the mechanism of advanced brake;
    • Withdraw two pins of direction of a support of the triangular form of support;
    • Withdraw the capture of direction of the superior party of the pin of direction;
    • Lower two boots through the screwdriver and the hammer.

To check

 ORDER OF REALIZATION

  1. The thickness of measure of discs of brake and the bedcovers of shoes of brake and the brakes System they compare the values received with demands of Specifications of the Head. Examine blocks and discs in the existence of mechanical damages. If necessary it substitutes blocks and / or discs.
  2. Measure an axial thrashing of a disc in the distance of 10 mm of his exterior edge and the brakes System compares the result of the measurement to demands of Specifications of the Head. If necessary there checks a play of axial side of the load. Adjust a disc that it hits for what carries out the next operations:

Meeting and installation

 ORDER OF REALIZATION

  1. The meeting and the installation are done upside-down. Pay attention till the next moments:
    • Do not allow the blow of oil and lubricant in bedcovers of friction of shoes of brake;
    • During the installation of the trace of boots on which his metal parts confiantemente bordered to a support of the triangular form of support;
    • Delay all the connections with the necessary efforts;
    • After the installation they fill the system of brakes of liquid, bomb is left he and system of control of holes.