LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car


Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
- Brakes system
   General information and measures of security
   Removal, installation and check of pedals of the system of brakes
   Check of the system of brakes was seeing the capture of the module of management
   Removal and installation of the tank and cylinder of main brake (MBC)
   Removal, check and installation of the amplifier of brakes
   Substitution of shoes of brake
   Removal, desmontagem, checks, meeting and installation of supports of mechanisms of brake
   Being demolished, check and the meeting of the brake of parking
   Check of valve of distribution of effort of brake
   Removal and installation of the activator of brakes
   Removal and installation of sensors of wheel
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
8ca8824c

Being demolished, check and the meeting of the brake of parking

Component of the parking brake

1 - the Intermediary lever
2 - the Regulator
3 - the plate Direction
4 - the Expansion plate
5 - Pruzhina
6 - the Lavador
7 - the subsequent boot
8 - the Bearer of a boot

9 - Repayable springs of a block
10 - the mechanism of brake of subsequent disc
11 - the Lavador with a reduction
12 - the Advanced boot
13 - the spring of Pressure of a boot
14 - the spring of Union
15 - a spring Saddle
16 - the Cork

To check

The description of the check of boots of the brake of parking is supplied in the Check of Section of Boots of the parking Brake.


 ORDER OF REALIZATION

  1. Measure the internal diameter of a disc of brake. Compare the values received with demands of Specifications of the Head the brakes System and if necessary a disc substitutes. The disc must be substituted and in the presence in him mechanical damages or unequal use.
  1. Measure a slit between the intermediary lever and a boot of the parking they curb and compare the value received with demands of Specifications of the Head the brakes System. If necessary agreement a slit, having caught a convenient lavador (the brakes System seeing Specifications).
  1. Take through the screwdriver a lavador of agreement and a lavador with a reduction. Establish a lavador of agreement of the necessary thickness, and soon through claws they install the lever and a lavador with a reduction. Again check a slit between the intermediary lever and a boot of the brake of parking.

To be demolished and meeting

 ORDER OF REALIZATION

  1. Withdraw a rear wheel, result two pins of the fixation of a support of the triangular form of a support and withdraw the meeting of the mechanism of rear brake then confiantemente they protect it in the suspended provision.

Do not overroll up and do not load a hose of brake.


  1. Withdraw a disc of brake.

If the disc does not manage to be withdrawn, to turn the regulator of boots so that the wheel can revolve freely.

  1. Withdraw two repayable springs of boots through claws.
  2. Desconecte a spring of union of an advanced boot.
  3. Move an advanced boot and withdraw the regulator.
  4. Withdraw a plate of expansion with one spring.
  5. Withdraw saddles of holding tight springs, springs and the bearer of a rear boot of brake.
  6. Desconecte a thread of the walk of the brake of parking of the intermediary lever.
  7. The meeting is done upside-down. The fat with the lubricant of high temperature indicates the component ones itself for firearms.
  1. After the installation of the brake of parking they adjust a slit of his boots. With this finality:
    • Temporarily establish nuts of wheel;
    • There results a cork of a disc of brake;
    • Turning the regulator, boots of part before blockading of a brake disc;
    • Return the regulator in 8 etiquettes in the opposite sense and screw a cork.
  1. Extra gains boots of brake with a disc. With this finality hold tight out a pedal of the brake of parking with the effort of 147 N and in this situation 400 goes on to the car in the distance approximately m with a speed approximately 50 km/h. Repeat this proceeding 2-3 times.
  2. In the conclusion again they check and adjust the course of a pedal of the walk of the brake of parking (to see the Check of Section e o adjusts of the course of pedals of the work and parking brake).