LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
- Placing and regular maintenance of the car
   General information
   General information on placing and agreements
   Time-table of regular maintenance
   Check of levels of liquids, control of holes
   Check of a condition of tires and pressure of his evaluation, rotation of wheels
   Substitution of filter of oil of reason and filter of oil
   General checks of the system of brakes
   Check and substitution of the filter of hall of a heater and to / in
   Check of a state and substitution of hoses of a compartment of reason, location of holes
   Check of a state and substitution of belts of the walk of auxiliary unities
   Substitution of the element of purifier of air of filtration
   Check of a condition of system of production of the carried out gases
   Check and substitution of captures of spark
   Substitution of fluid of brake, extraction through bomb of the system of brakes
   Check of a condition of component ones of a support of the triangular form of interruption and direction
   Check of a condition of protective coverings of ends of power and hinges of the driving axle
   The check of the operabilidade of there illuminate fixations, horn and supporter of a heater
   Check of the system EVAP
   Check of a state, agreement and substitution of brushes from clothes to rub of fabric
   His check of a condition of the battery and care
   Substitution of the cooling of liquid (CL)
   Check and adjust of slits valvate
   Check and adjust of the course of pedals of the work and parking brake
   Check of boots of the brake of parking
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections

8ca8824c

Check and adjust of the course of pedals of the work and parking brake

To check

 ORDER OF REALIZATION

  1. Distance of measure of the pedal of brake launched to a floor.
  1. If the measured size is not adapted with demands of Specifications of the Chief Nastroyki and regular maintenance of the car, adjust the height of the lifting of a pedal of a brake.
  2. The motor and several times kill hold tight out a pedal of a brake of work what in the vacuum amplifier there is no left depression.
  3. A hand holds tight a pedal of a brake of work up to the sensation of the resistance and measure the course of pedal of this situation to the launched situation.
  4. If the received size is not adapted with demands of Specifications of the Chief Nastroyki and regular maintenance of the car, check a slit of D/V of lights of the brake. If this satisfactory slit, the reason is covered in the brakes system.
  5. Launch a pedal of a brake of work and in the pressure of motor begun 490 had been he with the effort distance of N. Izmerta of a pedal to a floor.
  6. If the measured size is not adapted with demands of Specifications of the Chief Nastroyki and regular maintenance of the car, check a condition of the system of brakes.
  7. Slowly hold tight out a pedal of the walk of the brake of parking against the stop with the effort of 249 N and count the number of clicks.
  8. If the number of clicks is not in the variety of 5 for 7, adjust a pedal of the walk of the brake of parking.

Agreement of height of lifting of a pedal of a brake

 ORDER OF REALIZATION

  1. Withdraw the lowest left section of the panel (to see the Chief Kuzov).
  2. Separate the capture D/V of lights of the brake, his countersow gives and withdraw the sensor. There gives a countersow of a stick of press.
  3. Adjust the height of the lifting of a pedal of a brake, when a pedal stick is becoming the press then it holds tight his countersow with the effort of 26 nanômetros.
  4. Establish D/V of lights of the brake and join the capture of his electrical system.
  5. Hold tight out a pedal of a brake of work in 5÷10 of mm and become D/V of lights of the brake to blockade his nut in the provision of the extinguishment of lights of the brake.
  6. Hold tight out a pedal of a brake of work in 5÷10 of mm and one secures of the inclusion of lights of the brake.
  7. After the check of free agreement to go round of a pedal of a brake of work and they establish the lowest left section of the panel.

Agreement of a pedal of the walk of the brake of parking

Before the agreement of the brake of parking they secure that the slit of a boot of the brake of parking if it adjusts (the Head sees the System of brakes). The regulator of the brake of parking is located below the bottom, in the left side.


 ORDER OF REALIZATION

  1. It is secured what the pedal of the walk of the brake of parking launches.
  1. Register a coupler of screw and a countersow gives (A).
  1. Becoming a coupler of screw, adjust a pedal of the walk of the brake of parking.
  2. Hold tight a countersow (A) with the effort of 5 nanômetros.
  3. Several times lift the brake of parking and again check the course of pedal.
  4. If it is not possible to do the agreement through a nut (A), use a nut (B).
  5. One secures that the parking brake is not taken and To/L the parking brake works regularly.