Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
- Support of the triangular form of interruption and direction
General information
- Dispatch the support of the triangular form of interruption
Removal, desmontagem, meeting and installation of a nave and rotary fist
Removal, demolishing meeting and installation of a torture of a support of the triangular form of interruption
Removal and installation of the lowest lever of a support of the triangular form of interruption
Check and substitution of a spherical support of a support of the triangular form of interruption
Removal, installation and check of the stabilizer of a support of the triangular form of interruption
+ Support of the triangular form of subsequent interruption
+ Direction
+ Geometry of support of the triangular form of interruption
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections
|
Removal, demolishing meeting and installation of a torture of a support of the triangular form of interruption Removal, being demolished and check
Component of a torture of an advanced support of the triangular form of interruption
|
|
- Withdraw an advanced wheel.
- A pin results and withdraw of a few bearers of support of the triangular form of absorbent one of the shock of a hose of flexible brake and the electrical system of the sensor of the speed of ABS.
- Desconecte a torture of stabilizer of the absorbent one of the shock.
- Give two nuts lower of the fixation of a torture, but still do not withdraw pins.
- In the moment of the removal of the left torture they withdraw the tank of fluid of brake and separate the capture of the sensor of the level of fluid of brake.
- Give three superior nuts of the fixation of a torture, and soon finally give two lower nuts and take away pins.
- Withdraw the meeting of a torture of an advanced support of the triangular form of interruption.
- Establish two pins with nuts in the inferior arm of the fixation of a torture and hold tight it in a vice.
|
|
- Through the special adaptation they hold tight one spring and, maintaining the saddle from above of one spring, give a nut.
|
- Withdraw the superior support of a torture, the load, the saddle from above of one spring and the superior covering.
- To press and to spread out a stick of the absorbent one of the shock are secured of smoothness of his course and lack of exceptional sounds. In unsatisfactory results of the check they substitute the absorbent of the shock.
|
|
Meeting and installation
|
|
- Install the lowest saddle of one spring and a damper in the absorbent one of the shock.
- Through the special adaptation they hold tight a spring of screw and install it in the absorbent one of the shock.
|
|
More low the circle of one spring will rest against a groove of the lowest saddle. |
|
|
- Establish the superior covering and the saddle from above of one spring so that the etiquette was not turned on the outside of the car.
|
- Install the load and the superior support of a torture so that the etiquette was turned not by him on the outside of the car.
- Hold tight a nut of the fixation of one spring and withdraw the special adaptation of one spring.
- The installation is done upside-down. In the conclusion they check the angles of the installation of advanced wheels.
|
|
|
|
