LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car

Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
+ Placing and regular maintenance of the car
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
- Support of the triangular form of interruption and direction
   General information
   - Dispatch the support of the triangular form of interruption
      Removal, desmontagem, meeting and installation of a nave and rotary fist
      Removal, demolishing meeting and installation of a torture of a support of the triangular form of interruption
      Removal and installation of the lowest lever of a support of the triangular form of interruption
      Check and substitution of a spherical support of a support of the triangular form of interruption
      Removal, installation and check of the stabilizer of a support of the triangular form of interruption
   + Support of the triangular form of subsequent interruption
   + Direction
   + Geometry of support of the triangular form of interruption
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections

Check and substitution of a spherical support of a support of the triangular form of interruption

ORDER OF REALIZATION

The spherical support is established between the lowest lever of a support of the triangular form of interruption and a rotary fist (to see Component illustrations of the installation and meeting of a nave and a rotary fist and Component of the installation of the lowest lever of a support of the triangular form of interruption).

The description of removal and installation of a spherical support supplies with itself in the Removal of Section, desmontagem, meeting and installation of a nave and a rotary fist.

Withdraw a spherical support and establish it in a vice.

Shake a tip of support ahead and backwards approximately five times.

Continuously when there is holding tight a key of dynamometer a nut of support for a speed of 1 a turn of 2 ÷ 4 with, consider indications of a key in the fifth turn and compare them with demands of Specifications of the Chief Podvesk and direction. If necessary a spherical support substitutes.