LEXUS RX 300

1998 - 2003 of launch

Repair and operation of the car



Lexus RX 300
+ Lexus RX-300 cars
+ Administrations and methods of operation
- Placing and regular maintenance of the car
   General information
   General information on placing and agreements
   Time-table of regular maintenance
   Check of levels of liquids, control of holes
   Check of a condition of tires and pressure of his evaluation, rotation of wheels
   Substitution of filter of oil of reason and filter of oil
   General checks of the system of brakes
   Check and substitution of the filter of hall of a heater and to / in
   Check of a state and substitution of hoses of a compartment of reason, location of holes
   Check of a state and substitution of belts of the walk of auxiliary unities
   Substitution of the element of purifier of air of filtration
   Check of a condition of system of production of the carried out gases
   Check and substitution of captures of spark
   Substitution of fluid of brake, extraction through bomb of the system of brakes
   Check of a condition of component ones of a support of the triangular form of interruption and direction
   Check of a condition of protective coverings of ends of power and hinges of the driving axle
   The check of the operabilidade of there illuminate fixations, horn and supporter of a heater
   Check of the system EVAP
   Check of a state, agreement and substitution of brushes from clothes to rub of fabric
   His check of a condition of the battery and care
   Substitution of the cooling of liquid (CL)
   Check and adjust of slits valvate
   Check and adjust of the course of pedals of the work and parking brake
   Check of boots of the brake of parking
+ Motor
+ Cooling systems of the motor, heating, ventilation and air conditioning
+ A system of provision of power and production of the carried out gases
+ Systems of electric equipment of the motor
+ Automatic exchange and differential interaxal
+ Transmission line
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment
+ Schematic diagrams of electric connections

8ca8824c

Check and substitution of captures of spark

The spark captures must be substituted only in the cold or lightly hot motor. The candles reversion in the hot motor can implicate the damage of a woodcarving to a head of cylinders.

Meeting of the roll and taken of spark

 ORDER OF REALIZATION

  1. Put the ignition out.
  2. Withdraw a decorative covering of the motor (to see the Chief Dvigatel).
  3. The carefully separated captures of the electrical system of rolls of the ignition, result pins of the fixation of rolls and withdraw them of candles together with the placing.

Pins of fixation of rolls of ignition (left number of cylinders)

Pull for hints, but not for an electrical system. Before the removal of an electrical system they notice what roll brings itself.

  1. Result when a candle key was taken of spark, trying not to tilt it.
  2. Appreciate a condition of captures of spark. If necessary it substitutes wires and corrects bad possible functioning on which it is possible to judge for a candles condition.
  3. Insert new captures of spark and hold tight them with the effort of 18 nanômetros.
  4. Establish the placing and put candles of rolls then they hold tight pins of the fixation of rolls with the effort of 8 nanômetros.
  5. The captures of joining of an electrical system of rolls of the ignition according to the marks are done in the moment of the removal.
  6. Establish a decorative covering of the motor.